Description
HI 216 is a combination bench meter that can read conductivity in 4 different ranges, and resistivity.
For conductivity measurements, the calibration is a simple 1 point procedure through the easy-to-operate front panel knob, and the supplied probe does not require re-calibration when switching from one range to another.
The 4-platinum-ring probe has a built-in temperature sensor that automatically compensates for temperature changes, and the temperature coefficient can be adjusted from 0 to 2.5% through a knob on the front panel.
For resistivity measurements, the meter is factory calibrated and, if necessary, calibration can be adjusted by acting on the trimmer located on the rear panel.
The HI 3316D resistivity probe is easy to clean and requires little maintenance. It also features a built-in temperature sensor to automatically compensate for temperature variations, with an user-selectable (from 2 to more than 7%) temperature coefficient.
Both probes use the same DIN plug on the rear panel, and the meter automatically recognizes which probe is connected.
Sign In
