Description:
The PCA 330 series of analyzers check pH/ORP and chlorine levels in applications such as pools and spas, drinking water and influent and effluent discharge of water to ensure public safety, prevent waste and protect the environment by reducing over dosage.
Features:
• pH regulation with both ON/OFF and proportional controls
• Separate alarms can be set for pH and chlorine controls
• Parameters can be sent through SMS
• Large graphical display with backlight
• User-friendly interface
• Can store up to 3500 data, that can be displayed or downloaded to a PC
Specifications:
| Range | Free & Total Chlorine | 0.00 to 5.00 mg/L |
| Range | pH | 0.00 to 14.00 pH |
| Range | Temperature | 5.0 to 75.0°C |
| Range | mV | 0 to 2000 mV |
| Resolution | Free & Total Chlorine | 0.01 mg/L |
| Resolution | pH | 0.01 pH |
| Resolution | Temperature | 0.1°C |
| Resolution | mV | 1 mV |
| Accuracy | Free & Total Chlorine | ±8% ±0.05 mg/L |
| Accuracy | pH | ±0.05 pH |
| Accuracy | Temperature | ±0.5°C |
| Accuracy | mV | ±1 mV |
| Minimum Detectable Level | Free & Total Chlorine | 0.05 mg/L |
| Input Impedance | | 1012 Ohm |
| Calibration | Free & Total Chlorine | 1 point |
| Calibration | pH | 1 or 2 point |
| Sampling Rate | Free & Total Chlorine | adjustable from 3 to 90 minutes |
| Sampling Rate | pH | adjustable from 3 to 120 seconds |
| Dosage | Free & Total Chlorine | proportional with 4-20 mA output |
| Dosage | pH | ON/OFF with relay or proportional with 4-20 mA output |
| Delta | Free & Total Chlorine | selectable from 0.1 to 5 mg/L |
| Delta | pH | selectable from 0.1 to 2 pH (hysteresis adjustable from 0.05 to 2 pH) |
| Recorder Output | | 0-10 mV, 0-100 mV, 4-20 mA or 0-20 mA |
| Serial Communication | | RS485 port, galvanically isolated |
| Baud Rate | | 1200, 2400, 4800, 9600 bps |
| Data Logging | | up to 3500 data series |
| GSM Communication | | 2 programmable cellular phone numbers, alarm & information SMS
using the HI 504900 module (optional) |
| Alarm Relay | | SPDT contact with 5A, 230 V resistive load |
| Dosing Relay | | SPDT contact with 5A, 230 V resistive load |
| System Error | | SPDT contact with 5A, 230 V resistive load |
| Inlet Pressure | | 0.07 to 4 bar with no external pressure regulator
(for pressure exceeding 4 bar an external pressure regulator is required) |
| Sample Flow | | 100 to 300 mL/min |
| Sample Temperature | | 5 to 40°C (41 to 104°F) |
| Sample Inlet Connection | | 12 mm (1/2") tubing diameter |
| Drain Connection | | 10 mm (3/8") bar fitting |
| Power Supply | | 115 Vac or 230 Vac; 50/60 Hz; 20 VA (See Chart) |
| Enclosure | | NEMA-4X standard, molded fiberglass polyster
with transparent Lexan window |
| Dimensions | | 318 x 267 x 159 mm (12.5 x 10.5 x 6.25") |
| Weight | | 5 kg (11 lb.) without reagents |
Accessories:
Order Info:
The PCA 330 series is supplied with instructions
Downloads:
Manual: (Download)
Literature: (Download)
Manufacturer: N/A
SKU: PCA330
Sign In
